Any body interested for spares?  Contact Spiffy

Reasonable offers please to Spiffy (Terry) on 07960604894

1. Type T9CP 9 channel Computerised TX presently with 35MHz module, can be converted to 2,4GHz with plug in module (not provided).

2. T6EXAP 6 channel 35MHz TX with buddy lead to connect to 1. for teaching.

Both with necstraps etc. Batteries not tested recently.

Reasoable offers please - phone spiffy (terry) on 07960604894

Veron Tomtit Biplane - 57 4-stroke, servos and flightpack fitted (32" span)

Concept 30 Helicopter complete with some spares (Canopy, starter cone, linkages etc) fitted OS 2 -stroke, servos and Gyro.

My Scale Storch complete with flightpack 8ft span as flown at Sandown Park exhibitions and various shows for DB.  German Camo finish. Scratch built from modified plans. Superb slow flyer, STOL performance. Vintage but still flyable.

DC3 with twin 57 4-strokes, 9 servos fitted in Eastern airlines livery. Unflown, taxied only. Fitted robart retracts, split flaps etc.

Reasonable offers to clear- all these have been in store so will require some TLC

phone Spiffy on 07960604894 to view or haggle.

Be quick and phone 07960604894 if wanted.

The date of this post is 10/02/2020. Please treat this thread as live for the next couple of years or so.

I need the following RC model plane bits and pieces on an ongoing and regular basis for personal use and NOT for commercial gain. Do you have anything you wish to sell? Realistic prices paid in cash.

Wanted.

Good condition "new in box" and used low airtime four stroke engines, 0.70 > 180 size. I don`t mind them grubby, but I don`t like them worn out!

Always wanted, Futaba R617FS FASST  2.4 receivers. The lowest retail shop prices are around £51 each, supplied new across the counter or via the internet.  New or used, fully working, undamaged examples only please.

Futaba or other reputable standard size servos. Reliable units only please.

Futaba 7C 2.4 transmitters, working, dead or dying required.

Airframe parts for Hangar 9 Ultra Stick 10cc. I don`t mind crashed, "oak tree`d" or incomplete examples. In particular, I could do with some spare wings. Covering condition is unimportant.

Electric and I/C props between 15" and 18". Props must be in serviceable and safe condition.

Prop nuts, locker nuts, bolts and washers etc from scrap engines. OS, ASP, Magnum, SC, Irvine, YS etc. (MDS units not wanted!...... Metal Door Stop)

Please call me to discuss what you might have available. 01883 625406 or 07974 131127

Cheers guys,

Mike Kennedy

Sebart Sukhoi 29S 30E - Assembly Complete - Unflown

With:-

• Hacker A30-10 Motor
• Hacker X55 ESC
• 4 x HS-65 Servos
• 2 x EON28 2550Mah Lipo
• Spectrum AR600 receiver

All for £100.00 - Buyer collects.

I never did catch the electric bug!!  - Need space for new (IC) models.

Best Regards,
   =Adrian=

Does anyone have a large (preferably geared) powerful unit surplus to requirements that might be suitable? Worth me asking.

Thanks guys.

Mike Kennedy 01883 625406

Guys,

Does anyone have a good used 150/180 or similar size four stroke nitro engine they wish to sell?

Contact me on 01 883 625406 if you have one.

Thanks.

Mike Kennedy

I`m on the hunt for a good new or used OS 91/95 four stroke for my next project. This is likely to be a Flybaby Bipe similar to the one James flies.

PM or call me on 01883625406 if you have a motor you wish to sell.

Thanks.

Mike Kennedy

Wots Wot ARTF - flown around three times, comes in perfect condition ready to fly, has good quality gear along with a Saito gold head four stroke, run only a few times. Offers?

Funtana ARTF - Never flown, comes with servos and four stroke engine, along with spare canopy, wings, cowling and tail feathers. Offers?

Thousands of items from an ex-modellers workshop - including hundreds of tools, thousands of parts, fixings and spares, transmitters, servos, receivers, materials, etc. Buyer to collect what they want from Old Coulsdon with prior arrangement with myself and Mrs Hunt. Pay what you feel the items are worth, as Mrs Hunt would rather give them away using an "honest box" scheme to a good home where they will be used!

Sold as seen, please comment or message me for details. Thank you for looking!

I am happy to consider any reasonable offer for any, or all, of the following:-

Servos:-
1 x Hitec HS-225BB
1 x Hitec HS-85BB
1 x Hitec HS-7115TH
3 x Hitec HS-81
2 x Turnigy TGY 9018MG
(With original packaging and accessories)

Brushless motors:-
1 x BRC CF2822 (1200Kv)
3 x Turnigy DST-1200

ESCs:-
3 x GWS GWESC 25A
1 x Wasp 12A
1 x Jeti ECO 12A
1 x "No name" 12A

Radio:-
1 x Spektrum AR600 reciever
1 x Eagletree "Guardian" stabiliser
3 x V-tail mixer

Lipos:-
2 x Overlander 2S 1600mah 25C

Miscellaneous:-
1 x Align TREX painted canopy (700/800)
1 x Myskies "Wingman" kit
1 x "Model Glasses Nimbus" with 3 pairs (two of which polarised) lenses (These have been used - but I now need a prescription!!)
1 x Ducted IC Fan/Engine

Best Regards,

   =Adrian=

Weston mini Magnum complete with tuned 36 nitro engine, spektrum AR6210 RX with Sat and new Nimh 2300mah battery. Hitec HS-625MG and HS-65MG servos. Engine is a screamer! 

EFX racer complete with Zippy 35c 1800 battery and Spektrum AR6100 RX with factory servos. Some spares included. Very very fast! I have setup the ESC to give some 'Engine Breaking' as per the ESC instructions as this really does require flaps. 

Trex600 electric with Zippy 25c 5800 battery, Assualt 600 motor, Spektrum AR7000 Rx and Sat, Align GP750 gyro. 100A ESC has just blown so good for spares and damage to the carbon frame but still flies. Turnigy TGY-4409MD, Align DS615 servos. 

Trex600 Nitro FBL, beautiful clean machine. BeastX requires setup and has new Reaction 20c 5000mah Lipo battery. OS Max 55 motor and carbon main blades. On board glow start. Futaba S9256, S31525 servos. AR7000 RX with Sat. 

Avicraft Panic biplane. Needs TLC. Comes with Futaba S3004 and FP-S148 servos. Also a trip was made to Avicraft to buy new parts so engine mount, servo links, aileron links, fuel tank, wheels and all sorts were bought to fix this up after the previous owner crashed it. Fuel also included and MDS68 engine was bought but turns out to be a non runner so good for spares. 

Spektrum DX8 TX with charger and manuals. Optimix 20% fuel, Duraglow 16 fuel, carry case, glow start and charger, JP fuel pump, Imax B6 charger and leads with Ally carry case.

Im happy for this to go as a set or individually and open to offers. More photos can be sent if required

Also a full balsa laser cut kit of Hannos MAGIC 60 with plans and fibreglass canopy and cowel up for offers

I'm looking to buy a new model, and due to my restricted teenage budget I'm putting some stuff up for sale to raise funds. I have listed prices, but I am also open to sensible offers or negotiation. Please do not hesitate to ask any questions or ask for any more pictures. Viewing or collection will be at the field.

So, for sale are the following;

 ASP 36 (Good condition) - Has been in the front of a cougar 2000 for a short period of time before being put into storage. Has only had 20-odd flights on it due to the plane being crashed into very soft ground, and has since been stripped, cleaned, serviced and run by an experienced and seasoned CAMFC modeller. A very nice and powerful little engine, comes with rear tuning needle for £30.

OS MAX 55 AX (Good condition) - Was bought second hand from a CAMFC member for not much off of the original brand new price to be put into a new project. It has been run in but not used since, due to the said project not making it off of the bench. An extremely powerful and reliable engine, comes with OS Powerbox muffler for  just £45.

EnErG Pro 600 brushless outrunner 1100 (C35-14) (New condition) - Brand new and never used, bought for another project that has long since been forgotten. Capable of 1.5kg of thrust on a 3s with 13x6 prop. Bought  for £43, for sale today for £35.

FMS F-16 Falcon 70mm EDF (Used condition) - Acquired second hand as yet another project that I have lost interest in. It appears to have been crashed, but has been thoroughly repaired by the previous owner. Comes with servos, but no fan or motor. Bought for £60 at Avicraft a year ago, not touched by myself, yours for £35.

4ch Balsa Electric Trainer (Pristine condition) - A plane with no name bought from a very experienced modelling friend, that would be perfect as a first trainer or a nice summer model for everybody else. It appears to be covered in solarfilm and was originally made for a brushed power setup, although it will be a very easy brushless conversion. It is extremely well made and comes with servos.  Cannot give any other details other than a 55 inch wingspan and 40 inch length. Yours for only £45.

Pictures are below, sorry they are not in the correct order, but that's the way with the forum!

As I said before, please don't hesitate to ask any questions or ask for more pics.

Thanks for looking,

B

does anyone have a very low time OS Max .40 SF two stoke nitro/glow engine with muffler in near new condition that they might no longer need?

I have one almost new engine here but need another identical unit for an up and coming twin Ultra Stick project.

Please give me a call or pm me if you have one you no longer need.

Thanks.

Mike Kennedy. CAMFC member. 07974 131127

I`m in the market for one to go on another 60" Ultra Stick.

Perhaps give me a call if you have anything suitable please. 01883625406

Thanks,

Mike Kennedy

Sebart Sukhoi 29S 30E - Assembly Complete - Unflown

With:-

• Hacker A30-10 Motor
• Hacker X55 ESC
• 4 x HS-65 Servos
• 2 x EON28 2550Mah Lipo

All for £140.00 - Buyer collects.

Just add receiver!! - In fact, for an additional £10, I have a Spectrum AR600 receiver in unopened packaging.

I never did catch the electric bug!!  - Need space for new (IC) models.

Best Regards,
   =Adrian=

Sebart Sukhoi 29S 30E - Assembly Complete - Unflown

With:-

• Hacker A30-10 Motor
• Hacker X55 ESC
• 4 x HS-65 Servos
• 2 x EON28 2550Mah Lipo

All for £180.00 - Buyer collects.

Just add receiver!! - In fact, for an additional £20, I have a Spectrum AR600 receiver in unopened packaging.

I never did catch the electric bug!!  - Need space for new (IC) models.

Best Regards,
   =Adrian=

Made with Japanese quality it is a powerful, small and light engine suitable for funfly and lighter models alike. Bought about a year ago it has been in the front of my cougar ever since. It has had around 75 flights on it, so is still very much a new item. Despite being in a funfly plane I have only used it in 2 competitions (fast and slow + donut drop) so it has not been crashed or used harshly. It is one of the best, if not the best engine I have used, being unbelievably reliable, and starting with only the slightest flick or spin. Its reliability is best shown by the fact that it has only ever gone deadstick once, and that was due to fuel starvation! I am selling due to the very reluctant acceptance that electric power is best for funfly. As an added bonus it has been tuned and adjusted to perfection by nearly every experienced member in the club.

It has all of the original parts, including the original OS No.8 glow plug. It comes in original packaging with box and instructions. The engine itself is in perfect condition.

Bought new from SMC for £164.99, I'm asking £100, but I am very much open to any sensible offers, so please do contact me to discuss.

The buyer is also welcome to first inspect/bench run the engine before any purchase is made.

Thank you for looking,

B  

DJI F550 Hexcopter with Spektrum AR9000 with satellite receiver
First version of Naza as older model
6 DJI 2212/920KV Motors
6 30A Speed controllers
10 inch props
V1 Naza unit
Extra servo for drops etc
Light weight legs, can be removed if not needed
Some spare parts to go with it.
Can be seen in flight if weather good..

This will need Radio and lipo – 5000 3s or 4s better.
Near Biggin Hill,
collection only or from filed...
£115 ono

• Savox SH-1350 15£
• Hitec 77bb 10£
• EDF E-Flite V32 80mm complete with motor (2.5kg-5.4lb of thrust) 50£
• 2x A10-15S 10£
• A05-13s 15£
• A20-20L 18£
• YEP 7A 1-2s micro ESC 5£

All the product are perfectly working and someone is completely new.

Surplus to requirements, my ¼ scale Hanger 9 DCH-2 Beaver.

This model has been ‘scalyfied’ with Satin finish, panel lines and nearly all of the originals’ 400,000 dome-head rivets! It comes complete with servos, batteries, Graupner MZ12 radio gear & charger. 9-channel lighting set installed.  Ken, the pilot.

110” span / weight 18lbs. / 33cc Evolution petrol engine / sequential flaps.

First sensible offer over £500 secures. Delivered to Croydon club field or you collect.

see full model specification HERE