Administrators Rich 26 Posted May 25, 2016 Author Administrators Share Posted May 25, 2016 Trevor said: Hi Richard Good job on the website Is TAPATALK enabled for the forum? The app doesnt seem to recognise CAMFC anymore Cheers Hi Trevor Nope. No need, its now smartphone friendly, so doesn't require any additional software. Not just the forum either, the entire website Link to post Share on other sites
Mark Fry 0 Posted May 27, 2016 Share Posted May 27, 2016 Hi Richard, I'm getting "You do not have the required permissions to read topics within this forum." when trying to access the new General Multirotor forum. I've tried logging out and back in again but still cannot access. Thanks for all the hard work on the new forum, sorry to be a bother Link to post Share on other sites
Administrators Rich 26 Posted May 27, 2016 Author Administrators Share Posted May 27, 2016 Mark Fry said: Hi Richard, I'm getting "You do not have the required permissions to read topics within this forum." when trying to access the new General Multirotor forum. I've tried logging out and back in again but still cannot access. Thanks for all the hard work on the new forum, sorry to be a bother Hi Mark I think I have now resolved it. You are currently still just a "Registered user". Are you a Paid up member of the club? (That feels like a really stupid question) Link to post Share on other sites
Club Members Martin 0 Posted May 27, 2016 Club Members Share Posted May 27, 2016 The convention on forums until now has been that only the forums under "CAMFC Members" are restricted to members only - the others are public. I think that "CAMFC Members" is hidden to non-members, which also has the effect of hiding the forums under it. Link to post Share on other sites
Administrators Rich 26 Posted May 27, 2016 Author Administrators Share Posted May 27, 2016 martin said: The convention on forums until now has been that only the forums under "CAMFC Members" are restricted to members only - the others are public. I think that "CAMFC Members" is hidden to non-members, which also has the effect of hiding the forums under it. I know. Wasn't why I was asking.. Link to post Share on other sites
Mark Fry 0 Posted May 29, 2016 Share Posted May 29, 2016 Richard said: Mark Fry said: Hi Richard, I'm getting "You do not have the required permissions to read topics within this forum." when trying to access the new General Multirotor forum. I've tried logging out and back in again but still cannot access. Thanks for all the hard work on the new forum, sorry to be a bother Hi Mark I think I have now resolved it. You are currently still just a "Registered user". Are you a Paid up member of the club? (That feels like a really stupid question) Hi Richard, I am a fully paid up member... and I can also now see the General Multirotor forum Cheers! Link to post Share on other sites
Administrators Rich 26 Posted May 30, 2016 Author Administrators Share Posted May 30, 2016 Mark Fry said: Hi Richard, I am a fully paid up member... and I can also now see the General Multirotor forum Cheers! Thanks Mark, that answers 2 questions perfectly Link to post Share on other sites
Lofty 5 Posted May 30, 2016 Share Posted May 30, 2016 Just out of interest! Why has everybody post count gone down.....What is / was the reason? Did old posted get deleted? Link to post Share on other sites
Administrators Rich 26 Posted May 30, 2016 Author Administrators Share Posted May 30, 2016 Lofty said: Just out of interest! Why has everybody post count gone down.....What is / was the reason? Did old posted get deleted? Sadly I have absolutely no idea why that happened. I know and understand everything I have done, and I did spot it the day it happened, as I saw my own posts go down dramatically too, from 1000+ to 200+, but could see nor find any logical reason for it.. I can see some posts were deleted, but nowhere near the amount of what the post counts when doen by. Handfuls of posts deleted, yet post counts when down hundreds per-person... Link to post Share on other sites
Club Members Bravedan 106 Posted May 31, 2016 Club Members Share Posted May 31, 2016 Hi Richard, Any plans to add the Identity Information to get a specific CAMFC Icon attached to links, bookmarks, etc please? Link to post Share on other sites
Administrators Rich 26 Posted May 31, 2016 Author Administrators Share Posted May 31, 2016 Bravedan said: Hi Richard, Any plans to add the Identity Information to get a specific CAMFC Icon attached to links, bookmarks, etc please? If you can show me some examples of what you mean, I can then see what info is being used from our website and adjust as needed.. Have only now just found an ideal calendar for the website and will populate it over the next few days with the info I copied from old one.. Newsletter facility coming next Link to post Share on other sites
Club Members Trevor 25 Posted June 1, 2016 Club Members Share Posted June 1, 2016 Richard said: Trevor said: Hi Richard Good job on the website Is TAPATALK enabled for the forum? The app doesnt seem to recognise CAMFC anymore Cheers Hi Trevor Nope. No need, its now smartphone friendly, so doesn't require any additional software. Not just the forum either, the entire website Hi Richard, It is mobile friendly as you say. However, several of us look at other forums as well using TapaTalk and it is very convenient to have all the forums in the same list. It would be nice if the CAMFC one could be enabled for TapaTalk, is this possible? Link to post Share on other sites
Administrators Rich 26 Posted June 1, 2016 Author Administrators Share Posted June 1, 2016 Trevor said: Hi Richard, It is mobile friendly as you say. However, several of us look at other forums as well using TapaTalk and it is very convenient to have all the forums in the same list. It would be nice if the CAMFC one could be enabled for TapaTalk, is this possible? Hi Trevor Whilst I'm sure it very likely can be, after the agro it caused in upgrading the forum software, and the headache I had removing it just to get the upgrade to run, I would err on the side of "Keeping things simple", just due to lack of hours in a day in maintaining yet another app/addon. I don't know enough about Tapatalk backend either, as I have deliberately avoided it due to many problems with it, and as so many websites are going mobile friendly now, it might feel like a backwards move? Link to post Share on other sites
Pilot Ben 28 Posted June 1, 2016 Share Posted June 1, 2016 Hi Rich, The "new posts" isn't showing new posts. they are all 2/3 days old???? B Link to post Share on other sites
Club Members Bravedan 106 Posted June 1, 2016 Club Members Share Posted June 1, 2016 Richard said: Bravedan said: Hi Richard, Any plans to add the Identity Information to get a specific CAMFC Icon attached to links, bookmarks, etc please? If you can show me some examples of what you mean, I can then see what info is being used from our website and adjust as needed.. Have only now just found an ideal calendar for the website and will populate it over the next few days with the info I copied from old one.. Newsletter facility coming next I mean the icon that appears with the name in (say) the bookmarks toolbar in FireFox, etc. It used to be a little yellow plane, now its a dull almost monochrome world. Link to post Share on other sites
Club Members Bravedan 106 Posted June 1, 2016 Club Members Share Posted June 1, 2016 Pilot Ben said: Hi Rich, The "new posts" isn't showing new posts. they are all 2/3 days old???? B Working here.....................it lists my one above, and you cannot get much newer than that................ Link to post Share on other sites
Pilot Ben 28 Posted June 1, 2016 Share Posted June 1, 2016 Its up to date now, but it wasn't 2/3 hrs ago................... I'll think I'll manage. In the old forum, when you got a pm, or a topic you were watching changed, you got an e-mail. Is there a way to do this with the new forum, as it was really really useful. Thankyou, B Link to post Share on other sites
Pilot Ben 28 Posted June 2, 2016 Share Posted June 2, 2016 I have now got an email that I should have got last night. There seems to be a delay... Is there any way to solve this? Other than that, a cracking job well done B Link to post Share on other sites
Administrators Rich 26 Posted June 5, 2016 Author Administrators Share Posted June 5, 2016 Ben, many thanks. So long as it is working, its way down on the list of things to do right now.. If there is a problem, before we all jump on me to "fix it", can we first establish if it is limited to you or if others are having the same issue. Just like the "New posts", mine show up just fine, and I test these things across 4 computers with 4 different web browsers, hence just clicking on something is not classed as testing. It needs to be checked carefully on different operating systems with different browsers. Also, your forum signature makes it very difficult to read your posts, due to the amount of text it puts on-screen. Currently I'm working on the events calendar, with the developer of the calendar app. Havent spent too much money so far Link to post Share on other sites
Lofty 5 Posted June 10, 2016 Share Posted June 10, 2016 Richard Anyway to have the forums so we can edit post's again after some time! I can edit newish posts, but post's that are like 2 days old I can't edit anymore! I know some other forums that are also like this for reasons etc etc....... Thanks Link to post Share on other sites
Administrators Rich 26 Posted June 10, 2016 Author Administrators Share Posted June 10, 2016 Steve Have sent you a PM regarding this, but on the whole, editing is limited to 60 minutes and deleting posts is disabled. Update on the images, it seems a lot of the corrupted images have links to "tapatalk" Link to post Share on other sites
Club Members Bravedan 106 Posted June 11, 2016 Club Members Share Posted June 11, 2016 Richard said: Hi Mark I think I have now resolved it. You are currently still just a "Registered user". Are you a Paid up member of the club? (That feels like a really stupid question) Yes, he is............... Link to post Share on other sites
Club Members Bravedan 106 Posted June 19, 2016 Club Members Share Posted June 19, 2016 Hi Richard, Tried my phone today for the first time (Android, Samsung) as prep for reporting slope situation from site. It found the club home page list quickly (with no graphics to worry about which is good). However, when trying to get to the Forum from the menu, I found that all menu options started a "build bar" but then stalled with no further action. Going direct to http://www.camfc.co.uk/social worked, up came the forum OK. Dave Link to post Share on other sites
Pilot Ben 28 Posted June 19, 2016 Share Posted June 19, 2016 I use the forum on my phone and it works seamlessly all the time. Link to post Share on other sites
Club Members Bravedan 106 Posted June 19, 2016 Club Members Share Posted June 19, 2016 Pilot Ben said: I use the forum on my phone and it works seamlessly all the time. But do you access it directly or via the website front page? Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now