Just for you Joe

[Nutz 0]

Here is the link to the vid I captured of your flying Sunday Joe (scroll to the bottom of the page)

 

sorry about the quality it was done with mobile phone, there is also one with me driving to Avicraft .

[PaulC 0]

Joe,

 

Did you measure the voltage with the regulator in circuit or just wired up to a battery ?

 

The reason I ask is that most regulators only work properly under a load, it doesn't have to be much but there has to be something on the output or they wobble and give bad results..

 

also, check the wiring instructions some need to share a negative line, some need to be isolated (battery negative separate from the RX negative), this can also screw the output.

 

Chance's are its screwed but hope this helps..

 

Paul